Description:
Lindberg/Blue M vacuum ovens are designed for drying, curing, outgassing, aging, process control and other applications which require elevated temperature in reduced atmospheres or vacuum/purge with non-flammable and inert atmospheres. Select from three sizes, all with digital electronic control, built-in overtemperature protection, and a fully flexible vacuum/purge/release system for a range of uses. Single setpoint digital control, front-mounted. Simultaneous digital display of setpoint and actual temperature with push-button view of overtemperature setpoint, resolution to within 1°C. Keypad data entry and pull-out control module for easy service. Vacuum system has a 1" (25.4 mm) manifold, chamber rear, exterior, connects to pump or in-house vacuum source. Includes inert gas injection valve, fresh air inlet, vacuum exhaust port, controllable vacuum release vent port. Heavy gauge steel construction, dual wall, with fiberglass insulation for minimum heat loss in walls and door. Painted exterior or deluxe stainless steel finish. For use with non-flammable, non-corrosive inert gases only. Vacuum gauge, vacuum, gas and inlet valves located on front. High temperature silicone gaskets are supplied standard. Solvent resistant Buna-N high temperature gaskets may be ordered for specific applications where silicone is not preferred and temperatures are limited to +160°C. Viton-B gaskets are also available for applications involving acids. Pumps, cold traps, hoses, vacuum gauges, clamps and fittings must be ordered separately and require customer installation.
