Description:
Unique thermometer/timer with alarms is perfect for monitoring liquids, air/gas, or semisolids. Measure in either °F or °C with a range of 32 to 392°F and 0 to 200°C. Resolution is 1° and accuracy is ±2°C. Triple display simultaneously shows time remaining to zero, probe temperature, and temperature alarm setting. Large, 1-1/2 x 2-inch LCD may be read from 9 feet away. Two distinctive alarms signal time and temperature. Temperature alarm may be set in 1° increments. A five-minute alarm sounds continuously when temperature rises above alarm set point. Alarm continues for 5 seconds every minute until switched off or temperature falls below set point. Timer counts down from 24 hours and may be set in 1-minute increments. When zero is reached, a 1-minute alarm sounds, TIME’S UP flashes, and timer begins counting up. For repetitive times, a memory recalls previous setting. Intuitive controls are front-mounted. Viewing angle is adjustable. Fold- back display panel and magnets on back permit vertical mounting. Detachable, curved stainless-steel probe has a 1/4-inch diameter and 8-1/2- inch length. Metal cable (42 inches) may be placed in an oven or incubator. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer’s ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). High-impact, chemical- resistant ABS plastic base is 2-3/4 x 3 x 1/2 inches, display is 2-3/4 x 2- 1/2 x 1/2 inches, weight is 4-1/4 ounces. Supplied with a Traceable® Certificate and AAA battery for 1-year always-on monitoring. Replacement battery Cat. No. CON1105.
