Description:
Cannon 9726-A10 Model CT-500 Constant Temperature Viscosity Bath, 120V. For Kinematic Viscosity from 20 °C to 100 °C. Conforms to test methods ASTM D445/D446 and ISO 3104/3105. The CT-500 series constant temperature bath accommodates viscometer tubes requiring a bath depth up to 12" and provides reliable temperature control from 20 °C to 100 °C. The unit accommodates up to 7 simultaneous viscosity determinations. All wetted parts of the CT-500/518 Constant Temperature Baths are made of stainless steel, glass, or PTFE. The frame is fabricated from heavy aluminum and coated with a corrosion-resistant epoxy finish. Viscometers, holders, bath oil, and thermometers must be purchased separately. 120V.
- Temperature range: 20 °C to 100 °C ± 0.01 °C
- Temperature selection is variable between 20 °C and 100 °C or selectable at ten pre-set temperatures (20 °C, 25 °C, 30° C,
40 °C, 50 °C, 60 °C, 70 °C, 80 °C, 90 °C, and 100 °C) - Meets ASTM D445 temperature sensitivity requirements for kinematic viscosity determination
- Motor driven stirrer ensures a uniform bath temperature
- Seven glass viscometer ports (each 2” in diameter) and two thermometer ports (each 0.4” in diameter) allow up to 7 simultaneous viscosity determinations
- Bath thermistor senses over-temperature fault and removes power
- Thermistor disconnection results in removal of bath heater power
- Liquid level sensor prevents operation if bath liquid is not at a safe operating level
