Talboys (Troemner)

Photo of Talboys Shaft Extension Sleeves

Use Talboys Shaft Extension Sleeves to join shafts of the same diameter. Extension sleeves are made from precision bored stainless steel tubing. Each extension sleeve is designed to fit a specific shaft diameter. Join mixing paddles to extension bars to increase the paddle length. Connect the mixing paddle directly to the motor shaft by using the extension sleeve in place of the chuck.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Troemenr Talboys Model 104 Medium Duty Overhead Mixer

The 104 family of stirrers/mixes, is a multipurpose line of medium duty stirrers. Speed ranges of 7500 rpm or 750 rpm. Each model features a direct drive, high-speed drive shaft, perfect for water like fluids such as suspensions and emulsions. A 10:1 reduction gear is a low speed, high torque drive shaft that gives these units the power necessary to permit stirring of heavy viscous pastes, glues and oils, making this line more versatile and multipurpose. S5485-1 has a 42" cord remotely attaches the electronic control.

Photo of Troemner Talboys Model 103 High-Speed Overhead Mixers

The Talboys Model 103 mixers are an extremely high-speed group of stirrers. Rated at speeds of 1000-7500 rpm, these stirrers can be operated at 12,000 rpm when the motors are not at full load. Because of these high speeds, these motors are actually fairly low in torque. Be sure to check the motor load if operating these stirrers with any fluid whose viscosity is above that of water. Be sure to use only the model 193 Collet chuck. All of the 103 family of stirrers use the same 1/12 hp motor, configured with different speed controls.

Photo of Troemner Talboys Model 409 and Model 429 Heavy Duty Overhead Mixer, 1/4 HP

Talboys Model 409 & 429 Overhead Single Shaft Mixers have a powerful DC permanent magnet motor that delivers power and reliability for high viscosity mixing. It is the perfect unit for mixing tar and epoxy-like materials. Mixer maintains constant speed (50 to 500 RPM) even when the viscosity changes. Top mounted Standard Speed Control is included. These mixers are fitted with an adjustable Jacobs style chuck that accepts any accessory shaft. Overhead mixer includes adjustable chuck, model 112 heavy-duty holder and 8-inch mounting rod for mounting motor to support stands.

Photo of Talboys Propeller Blade Stirring Paddles

This classic propeller design paddle is available in several sizes and configurations for your unique mixing needs. Attach several blades for increased agitation. This paddle can be used with Talboys stirrers and as well as with other stirrers. These paddles are made from stainless steel and are suitable for axial flow stirring of many types of liquids. Each propeller blade assembly comes on a bushing (for a given shaft diameter) with a stainless hex-head setscrew and Allen key for attaching to extension bars.

Photo of Talboys Mixing Shafts

Talboys Mixing Shafts are made of stainless steel. Add propeller blades to customize these shafts. For increased agitation, add multiple blades on one shaft.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Troemner Talboys 2" Swivel Blade Paddles

Troemner Talboys 2" Swivel Blade Paddles mix the contents of vessels with narrow mouths. Use this paddle with stirrers designed to accept 1/4-3/8" (6.4-9.5mm) diameter shafts. Made of durable stainless steel, this paddle comes as a swivel blade attached to a shaft. Shaft diameter and length vary. The blade measures 2 x 1/2" (51 x 13mm).

(Sample Photo Displayed. Individual items may differ from the image shown)

 

 

 

Photo of Troemner Talboys Stainless Steel Beater Paddles with 5/16" Dia. Shaft

Use Troemner Talboys Stainless Steel Beater Paddles with stirrers designed to accept a 5/16" (7.9mm) diameter shaft. The Beater Paddle is recommended for heavy-duty, slow-speed motors. Paddle design creates radial flow that is ideal for mixing high-viscosity fluids. Paddle design inhibits incorporation of air, making it suitable for stirring shampoos and other foaming liquids. The complete assembly is constructed of stainless steel and is available PTFE coated. Blade size for all shafts approximates 5-1/2" (140mm) long x 4" (101mm) wide.

Photo of Troemner Talboys Stainless Steel Zig Zag Paddles

Troemner Talboys Stainless Steel Zig Zag Paddles promotes mixing of heavy fluids like paints, pastes and creams. Stainless steel durability. Also available with PTFE coating.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Troemner Talboys Chain Paddles

The Chain Paddle is useful for mixing the contents of narrow-necked containers and this paddle fits openings as small as 5/8" (16mm). Popular for blending suspensions, the chain paddle also stirs both low and high viscosity liquids. Both chain and shaft are made of stainless steel. Shafts vary in diameter and length. Swing diameter of chain is approximately 3" (76mm).

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Troemner Talboys U-Shaped Paddles

Troemner Talboys U-Shaped Paddles are designed for high viscosity materials or large batch mixing. Constructed of stainless steel and also available with a PTFE coating. These radial flow paddles are recommended for high torque, heavy duty mixers.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Troemner Talboys 3½" Stainless Steel Propeller Shafts

Troemner Talboys 2" Propeller Shafts are constructed of 303/304 stainless steel. 15° pitched blades produce an axial flow. This three-bladed propeller is also available with a PTFE coating.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

 

 

Photo of Troemner Talboys 2" Stainless Steel Propeller Shafts

Troemner Talboys 2" Propeller Shafts are constructed of 303/304 stainless steel. 15° pitched blades produce an axial flow. This three-bladed propeller is also available with a PTFE coating.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

 

Photo of Troemner Talboys 3" High Speed Dispersion Blades

Troemner Talboys 3" High Speed Dispersion Blades tear particles apart and disperse them uniformly throughout a sample. Constructed of stainless steel with welded bushing and a set screw for mounting on mixer shafts. Designed for high speed dispersion.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Troemner Talboys Support Stands with Rods. Stainless Steel

Troemner Talboys Support Stands with Rods are made entirely of 303 stainless steel. Durable base can accommodate vessels up to 18" (45.7cm) in diameter within the "U". Base area is 17.75" (45.1cm) across and 10.5" (26.7cm) deep overall. The stainless steel support rod is 5/8" (15.9mm) in diameter and is screwed into the support base. Two additional threaded holes in the base legs accommodate rods, enabling the stand to support two mixers. The "U" shape of the base should be turned from the mixing apparatus when the two outside rods are in use.

Photo of Troemner Talboys Glass Rod Chucks

Troemner Talboys Glass Rod Chucks hold glass mixing rods. Eliminates the wobbling and vibration problems associated with glass mixing rods. Aluminum chuck is equipped with nylon inserts needed for 0.24", 0.31" and 0.39" diameter mixing rods. Individual chucks accept 1/4", 5/16" or 3/8" diameter motor shafts.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Troemner Talboys Collet Chuck

This precision collet chuck is used when the motor shaft and accessory shaft are the same diameter. The precision collet chuck is true running and is the preferred choice when running at high speeds. Made of stainless steel.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Troemner Talboys Adjustable Jacobs Style Chucks

Adjustable Jacobs Style Chucks should be ordered based upon the diameter of the motor shaft you are using. Each chuck can accommodate accessory shafts from 1/16" to 3/8" diameter. Chuck key is included.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Troemner Talboys Model 138 Dual Shaft Heavy Duty Overhead Mixer, 1/8 HP

The Model 138 is a dual shaft stirrer that provides greater torque at all speeds. The direct drive shaft provides a high-speed range of 500-7500 rpm, while the reduction gear shaft provides low-speed of 50-750 rpm with increased torque. This Heavy-Duty Stirrer features greater horsepower and greater torque over the available speed ranges to resolve many difficult mixing jobs, such as higher viscous materials.

Photo of Troemner Talboys Model 134-2 Three Speed Heavy Duty High Viscosity Overhead Mixer, 1/8 HP

Talboys Model 134-2 is a durable, rugged and extremely versatile high viscosity mixer. Unit offers the power and versatility required for viscous mixing. Heavy-Duty Overhead Mixer offers higher horsepower and greater torque over available speed ranges for difficult mixing jobs. Use direct-drive for high speed mixing of low viscosity liquids (500 - 7500rpm). Utilize the 10:1 reduction gear for lower speed stirring (50 - 750rpm) of more viscous oils, light grease, gels, or glues that require a higher torque. It is ideal for emulsions and suspensions where high speed and torque are required.