Labconco

Photo of Flexi-Bin Carts. Labconco
Labconco Flexi-Bin Carts are available with a 4" or 10" deep bin. For safe transport of glassware and chemical containers. Features a removable, corrosion-resistant polyethylene bin. Includes three long (20.25") and four short (15.25") polyethylene dividers for partitioning the bin to securely hold items in upright position. The bottom open shelf holds additional supplies. Additional features: 4" diameter casters, two with toe locks; ready-to-roll, full factory assembly; ergonomic, extruded rubber handle grips; durable glacier white, epoxy-coated 18 gauge welded tubular steel frame; ID tag.
Photo of LabSolutions Powder Detergent
LabSolutions Powder Detergent is specially formulated for Labconco SteamScrubbers and FlaskScrubbers, but can be used in any glassware washer. Non-foaming formula does not promote leaks and rinses completely. A 1% solution has a pH of approximately 12.5. Non-hazardous formula may be shipped anywhere.
Photo of WaterPro Reverse Osmosis Station. Labconco
WaterPro RO Station delivers RO purified water, ideal for laboratory applications such as reagent preparation and glassware rinsing. Its water may be used to supply the final rinses for laboratory glassware washers. The WaterPro RO may be used to pretreat tap water for ultimate purification by a polishing system. Constructed of epoxy-coated steel with Type 304 stainless steel front panel. Control panel includes ON/OFF switch; LED display; µS, TEMP, TIME DISP.
Photo of Labconco Gel Dryer
Gel Dryers dry large gels up to 13.2" x 16.7" maximum (33.6 x 42.3 cm) or any combination of smaller gels for preservation or subsequent processing such as autoradiography. Separate vacuum and heat timers provide versatility to establish many different drying conditions. Drying times vary, depending on the vacuum source, gel concentration and gel thickness. Features include 800-watt heating element, aluminum platen, 4-hour heating timer, 4-hour vacuum timer, temperature control knob with adjustment from 40° to 80° C.
Photo of RapidVap N2/48 Evaporation System. Labconco
RapidVap N2/48 Evaporation Systems use nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once. A stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. These Systems may be used to prepare samples for applications such as drug development and metabolism, bioresearch, combinatorial chemistry, environmental testing, forensics and toxicology.
Photo of RapidVap N2 Evaporation System. Labconco
The RapidVap N2 Evaporation Systems offer a more efficient, automatic alternative to Kuderna-Danish and rotary evaporators and may be used with a broad range of aggressive chemicals. In RapidVap N2 Systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.
Photo of FreeZone 1 Liter Benchtop Freeze Dry System
The FreeZone 1 Liter Benchtop Freeze Dry System is designed for light aqueous sample loads or personal use. Compact design with small footprint fits in tight spaces. Epoxy-coated steel exterior. Upright stainless steel collector coil removes 1 liter of water in 24 hours and holds 1 liter of ice before defrosting is necessary.
Photo of FreeZone 2.5 Liter Benchtop Freeze Dry System
The FreeZone 2.5 Liter Benchtop Freeze Dry System is designed for light sample loads or personal use. Compact design with small footprint fits in tight spaces. Epoxy-coated steel exterior. Upright stainless steel collector coil removes 2 liters of water in 24 hours and holds 2.5 liters of ice before defrosting is necessary.
Photo of FreeZone 4.5 Liter Console Freeze Dry System
The FreeZone 4.5 Liter Console Freeze Dry System is designed for light aqueous sample loads. Removes over 2 liters of water in 24 hours. Features a permanently-installed 10-port stainless steel drying chamber and stainless steel collector chamber and coil.
Photo of Basic Fume Hoods. Labconco
Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles. Basic Laboratory Hoods have a by-pass airflow design, 3/16" thick tempered safety glass vertical-rising sash, 10.13" OD exhaust connection, removable front panel, air foil and two-piece adjustable baffle.
Photo of Fiberglass 30 Laboratory Fume Hoods. Labconco
Compact, benchtop Fiberglass 30 Laboratory Hoods are designed for research, educational and clinical applications requiring small working space and efficient fume removal. The fiberglass liner is corrosion-resistant, durable, fire-resistant and light reflective. The smooth one-piece molded construction offers fewer crevices for easy cleaning. Fiberglass 30 Laboratory Hoods are suitable for general chemistry applications. Explosion-proof models are available for applications involving high concentrations of flammable solvents.
Photo of Purifier HEPA Filtered Enclosures. Labconco
Purifier HEPA Filtered Enclosures protect the user from agents that require Biosafety Level 1, 2 or 3 containment but no product protection. Exclusive features include: ergonomic air foil with aerodynamic Clean-Sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.
Photo of Purifier Class 1 Safety Enclosures. Labconco
Purifier Class I Enclosures protect the user from agents that require Biosafety Level 1, 2 or 3 containment but no product protection. Exclusive features include: ergonomic air foil with aerodynamic Clean-Sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.
Photo of Filtered PCR Enclosures. Labconco
Purifier Filtered PCR Enclosures provide ISO Class 5 conditions appropriate for polymerase chain reaction experiments.
Photo of Protector® ClassMate Laboratory Fume Hood. Labconco
The patented Protector® ClassMate Laboratory Hood is designed to meet the needs of instructional laboratories. Clear back and sides and taller front viewing window provide enhanced visibility for conducting chemistry demonstrations or observing students using the hood. The clear back also does not obstruct visibility when hoods are placed back-to-back in an island configuration. Clear, 1/4" thick, tempered safety glass sides, back and baffle provide maximum visibility and are removable for cleaning.
Photo of Demonstration Fume Hood. Labconco
Protector® Demonstration Hoods are low profile, light-duty fume hoods designed to provide close observation of procedures during educational demonstrations. 33.6" w x 29.1" d (heights vary, see below). Features include: ergonomic air foil with aerodynamic Clean-Sweep airflow openings; upper containment sash foil; upper dilution air supply; and side-entry air foils.
Photo of Protector XL Floor-Mounted Walk-In Laboratory Hoods
Protector XL Floor-Mounted (Walk-In) Laboratory Hoods have panel liners that may be constructed of a variety of corrosion-resistant materials and supplied in three depths to meet individual installation and application requirements. These Floor-Mounted (Walk-In) Laboratory Hoods have a by-pass airflow design, 12.81" ID exhaust connection, 3/16" thick sashes, chemical resistant molded composite panel liner and adjustable baffles, front and interior access panels. ADA-compliant light and blower switches and 2 service fixtures. Glacier white dry powder epoxy-coated steel exterior.
Photo of Protector XVS Ventilation Stations. Labconco
Protector XVS Ventilation Stations provide user protection by keeping powders and fumes contained during light duty, fume-generating or weighing procedures. Patented features include air foil with Clean-Sweep openings to enhance airflow and zoned-perforated rear baffle that creates horizontal laminar airflow to maximize containment.
Photo of Protector® PVC Perchloric Acid & Acid Digestion Fume Hoods
Protector PVC Perchloric Acid Laboratory Hoods feature washdown systems, integral work surfaces and drainage troughs so that they may be thoroughly rinsed after each use to prevent the accumulation of potentially reactive perchloric salts. Their liners of Type 1 unplasticized polyvinyl chloride are designed to withstand reaction from perchloric acid.
Photo of Canopy Hoods. Labconco
Canopy Hoods are specifically designed to vent non-toxic materials such as heat, steam and odors from large or bulky apparatus such as ovens, steam baths and autoclaves. The hood may be installed on a wall or suspended from the ceiling for peninsular and corner locations. Built-in baffle to increase air velocities and enhance its overall capture efficiency. Glacier white epoxy-coated steel construction. Coupled with a blower and ductwork, the Canopy Hood can operate at a wide range of exhaust rates. Remote blower or FilterMate Portable Exhauster and filters required. 115V.