Nalgene (Thermo Scientific Inc.)

Photo of Nalgene 2210 Round Carboys with Handles-LDPE

Nalgene 2210 Round Carboys with Handles do not have a spigot. They are a good choice for storage and transport of reagents. Low density polyethylene (LDPE) resin is made using less catalyst than HDPE and is a better choice for reagents sensitive to the polymerization catalyst. Round, graduated to contain in 5 Lt and 1 gallon increments. Wide shoulder handles allow easy carrying and pouring even with gloved hands. These carboys accept 13.5 rubber stoppers for an alternative sealing method. Leakproof.

(Sample Photo Displayed. Individual items may differ from the image shown.)

Photo of Nalgene 2250 Autoclavable Round Carboys without Spigot-Polypropylene

Nalgene 2250 Autoclavable Carboys without Spigot are ideal for large batches of culture media, vaccine product production, bulk media and chemical storage. Convenient shoulder handles allow easy carrying and pouring, even with gloved hands. These carboys feature a large mouth for easy filling/dispensing, and are made of natural polypropylene with white 83B polypropylene closure and TPE (thermoplastic elastomer) gasket. Graduated to contain in 1 gal. and 5L increments for ease of use. Nalgene Top Works Fluid Transfer Systems (Cat. No. 2135) permits convenient liquid aseptic transfer.

Photo of Nalgene 2234 Wide-Mouth Graduated Carboys with Handles-LDPE

Nalgene 2234 Wide-Mouth Graduated LDPE Carboys with Handles. Store and transport solids and powders. A convenient, large opening promotes ease of cleaning and dispensing and can accommodate overhead mixers while its wide-shoulder handles enable easy carrying and pouring, even with gloved hands. Graduated to contain in 1 gal. and 5L increments for ease of use. Nalgene 2234 Wide-Mouth Graduated Carboys with Handles include leakproof white PP (polypropylene) 100mm screw closures.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

 

Photo of Nalgene 2405 Autoclavable Wash Bottles-PPCO

Reduce the risk of contamination when dispensing sterile water or reagents by using Nalgene 2405 Autoclavable Polypropylene Copolymer Wash Bottles. These bottles are flexible, contact-clear, and designed to dispense through the top with a closure and stem molded in one piece for uniform leakproof service. Tip can be cut back to provide increased flow. Bent stem dispensing tube retains its bend after autoclaving but bend angle can be modified by hand while warm if desired. The tight fit of the draw tube and closure prevents separation when squeezing bottle.

Photo of Nalgene 2402 Unitary Wash Bottles LDPE

Nalgene™ 2402 Unitary™ LDPE Wash Bottles will dispense contents without tipping or shaking. Designed with a wide mouth for faster, easier filling. Bottle and tubulation are molded in one piece for uniform leakproof service and precision flow without sputtering. The tip can be cut back to increase flow.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Nalgene 2407 Wide-Mouth Wash Bottles-LDPE

Nalgene 2407 Wide-Mouth LDPE Wash Bottles Pour without sputter because of the precision molded tip. These wash bottles feature a wide-mouth design for easy filling and a through-the-top closure and stem molded in one piece. Tight fit of draw tube and closure prevents separation when squeezing bottle. Tip can be cut back for increased flow. Leakproof.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Nalgene 2421 Fluorinated Solvent Wash Bottle-HDPE

Eliminate risk of leakage with self-venting Nalgene™ 2407 Fluorinated HDPE Solvent Wash Bottles, which keep the solvent in the bottle. Offering low permeability and excellent chemical resistance to many organic solvents, these high density polyethylene bottles are useful over a temperature range from 0° to 90°C (32° to 194°F). Bottles are designed to dispense through the top with a closure and stem molded in one piece for uniform leakproof service. The tip is molded to provide a straight stream with precision control and can be cut back to increase flow.

Photo of Nalgene 2403 Teflon FEP Wash Bottles

Nalgene 2403 Teflon FEP Wash Bottles ensure contamination-free dispensing and are useful for trace element work. These phthalate-free bottles offer excellent chemical resistance and are molded entirely of fluoropolymers. Designed to dispense through the top with a closure and stem molded in one piece for uniform leakproof† service. The precision-molded tip provides a straight, steady stream and ultimate control without sputtering. Tip can be cut back to provide increased flow. Autoclavable and Leakproof.

(Sample Photo Displayed. Individual items may differ from the image shown.)

Photo of Nalgene 2425 Right-To-Know Wash Bottles-LDPE

Nalgene 2425 Right-To-Know Wash Bottles meet regulatory labeling requirements for chemical containers and use standard, instantly recognizable symbols and colors. Chemical name, International Chemical Society (ICS) chemical formula and Chemical Abstract Service (CAS) number printed on bottle for easy identification. Color bar that corresponds to colored closure to prevent cross-contamination. These low density polyethylene bottles are flexible for easy dispensing and translucent for viewing contents. Self-venting, but contents stay in bottle with no risk of leakage. Leakproof.

Photo of Nalgene 2436 Vented Unitary Right-To-Know Wash Bottles

Nalgene 2436 Vented Unitary LDPE Right-To-Know Wash Bottles help keep hazardous volatile liquids off the lab bench. These wash bottles feature a unique vent system. Unitary bottle prevents contamination when filling the bottle; no draw tube assembly to pick up contamination off the lab bench. A strong, steady stream of liquid is dispensed when the wash bottle is squeezed. Marked with four color, NFPA diamonds, GHS compliant hazard symbols, and right-to-know chemical information. Choose from seven chemical markings. Leakproof.

Photo of Nalgene DS2408 Unitary Red Safety Wash Bottles-LDPE

Nalgene DS2408 Unitary LDPE Red Safety Wash Bottles have a wide mouth for safe, fast filling. Bottles are colored red for easy identification and instant recognizablility, for use with acids, bases and alcohols; include red polypropylene screw closures. Molded in one piece, no delivery tube to drip when filling - no contamination of bottle contents by delivery. Leakproof.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of LDPE Color-Coded Wash Bottles
These LDPE Color-Coded Wash Bottles let you color code reagents or coordinate with industry storage codes. Non-vented closure and stem molded in one piece for leakproof service. Tip can be cut back to increase flow.
Photo of Nalgene 2410-0125 Unitary Dropping Bottle_125mL

Nalgene 2410-0125 Unitary Dropping Bottles deliver drops, not a stream. Includes leaktight plug for spout. Low-Density Polyethylene construction.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Nalgene 2411 Dropping Bottles with Cap-LDPE

Nalgene 2411 LDPE Dropping Bottles with Cap. Dispense just one drop at a time, with convenient, one-hand operation. bottles feature tethered spout caps which snap securely in place and won't break away when bottles are squeezed. These low density polyethylene bottles are chemically compatible with most acids, bases and alcohols. View liquid levels easily through translucent wall.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Nalgene 2401 Economy Wash Bottles-LDPE

Nalgene 2401 LDPE Economy Wash Bottles. Through-the-top low-density polyethylene wash bottle with closure and stem molded in one piece for leakproof service. Tip can be cut back to increase flow. Tight fit of draw tube and closure prevents separation.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Nalgene 7135 BioTransport Carrier

Nalgene 7135 Polycarbonate BioTransport Carrier. Transport racks containing tubes or sample holders filled with potentially infectious materials. Polycarbonate carrier is tough and break resistant. This carrier offers excellent visibility of contents. Silicone gasket seals tightly. Clamps securely hold carrier closed and assure leak-resistant seal. Stainless-steel handle available separately (7136-0001). For accidental spills inside of carrier, autoclave with clamps closed. 

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Nalgene 6501 Safety Bottle Carriers-LDPE

Nalgene 6501 LDPE Safety Bottle Carriers. Safely and easily hold 2.5L and 4L chemical bottles, with or without finger loops. These carriers hold and protect standard acid and chemical bottles and permit pouring without removing the bottles. A clear polycarbonate cap protects bottle closure and allows identification of color-coded closure on acid bottles. Cap twists for removal from cover, so there is no need to remove bottle from carrier to pour. Epoxy-coated handle locks in place while carrying contents. Carrier cushions glass bottles from breakage.

Photo of Nalgene 2158 Polypropylene Quick Filling-Venting Closures

Nalgene 2158 Polypropylene Quick Filling-Venting Closures. Ported 83B closure features quick disconnect fittings and inside/outside barbed tubulations. Forms a convenient fluid transfer system with the tubing of your choice. Available in 2 or 3 port styles for 1/4" or 3/8" tubing. Socket fittings in cap have internal valves that seal when a tubulation fitting is removed so container seal integrity is maintained. Excellent for use in vacuum systems with Nalgene Heavy Duty Carboys and Bottles. Use with Nalgene 180 heavy-wall tubing. Polypropylene closure and fittings, TPE gasket.

Photo of Nalgene 223-0030 Carboy Vent Filter

A compact filter for venting and solvent filtration applications. Useful for maintaining purified water stored in carboys. The Disposable Carboy Vent Filter features a PTFE (polytetrafluoroethylene) membrane. The hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of Nalgene PP and PC carboys up to 50L. Can be used up to five times in venting applications. Non-sterile. WARNING! All NALGENE Filterware is for research use only, not for in vitro diagnosis or parenterals.

(Sample Photo Displayed. Individual items may differ from the image shown.)

Photo of Nalgene 7012 Autoclavable Graduated Buckets-Polypropylene

Nalgene 7012 Autoclavable Polypropylene Graduated Buckets. These general purpose laboratory buckets have good chemical resistance and are autoclavable. Molded-in graduated in pints and liters are easy to read. Made of white polypropylene with nylon-coated wire bail. Sturdy and tall design.

(Sample Photo Displayed. Individual items may differ from the image shown.)