Distilling Flasks

Photo of Corning 4965A PYREX® Three Neck Distilling Flasks with Angled Necks and 24/40 Standard Taper Joints

These PYREX® three neck flasks have two angled side necks at the same height with 24/40 Standard Taper outer joints and a larger center neck with a vertical 24/40 Standard Taper joint.

Photo of Corning 4950 PYREX® Three Neck Distilling Flasks with Vertical Necks and 24/40 Standard Taper Joints

These PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height

Photo of Corning 4965B PYREX® Three Neck Distilling Flask with 19/22 Center Vertical and Side Angled Necks with Standard Taper Joints

These PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint.

Photo of Corning 4720-500 PYREX® 500mL Church Distilling Flask

These 500mL PYREX® distilling flasks are used for the distillation of bituminous materials suitable for road treatment. Also used in the Standard Method of Test of the Distillation of Creosote Oil, American Wood Preservers Association, method 11e, Barrett method C 9, American Association of State Highway Officials, methods T 52 and T 62. Flasks take a No. 5 rubber stopper.

Photo of Corning 4960 PYREX® Three Neck Distilling Flask with Vertical Neck Standard Taper Joints

These PYREX® three neck flasks have two vertical side necks with full length outer Standard Taper joints and a vertical center neck with a full length Standard Taper joint.

(Sample Photo Shown. Individual items may differ from the image shown.)

Photo of Corning 4620 PYREX® Side-Arm Distilling Flasks

These PYREX® distilling flasks are used are suitable for microchemical applications. The sidearm on all sizes, except 125mL, is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. The sidearm of the 125mL flask is located approximately 137mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447.

Photo of Kimble 26246-500 KIMAX 500mL Three-Neck Round Bottom Distilling Flask with 24/40 Vertical Standard Taper Joints

Kimble 26246-500 KIMAX 500mL Three-Neck Round Bottom Distilling Flask with 24/40 Vertical Standard Taper Joints. This flask has a center neck that extends above the side necks. Designed from ASTM Specification E1378, Type III requirements. 1/case.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Kimble 26016-125 KIMAX 125mL Engler Distilling Flasks with Three Reference Lines

Kimble 26016-125 KIMAX 125mL Engler Distilling Flasks with Three Reference Lines are for use with Haage automatic distillation apparatus or others that call for three thermometer insertion depths. Ref: ASTM D86.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Kimble 26015 KIMAX Engler Distilling Flask, ASTM D86, D233, D801, and D802

Kimble 26015 KIMAX Engler Sidearm Distilling Flask. All sidearm tubes are sealed at an angle of 75° from the neck. The 125 mL size has a sidearm 137mm (± 3 mm) from the bottom of the flask and is designed from ASTM Specification E133. Intended for use in ASTM D86, D233, D801, and D802.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of PYREX® Saybolt Viscosimeter Flask
Of rugged mold blown construction, this 60mL PYREX® flask is calibrated in accordance with ASTM specifications. U.S. Bureau of Mines Technical Paper 323B, No. 30.41; A.A.S.H.O. No. T 72; and "Gas Chemists Handbook," third edition, page 538. Reference: ASTM D-88 and E-102.
Photo of Kimble® 610900-0200 Kontes® Heavy Wall 200mL Barrett Distilling Flasks

·          Barrett distilling flasks made to ASTM E133 specifications
·          610900-0200 conforms to Flask C in ASTM E133 and also is compatible for use with ASTM D1078
·          These flasks feature smooth, consistent, heavy walls for uniform heating and minimal breakage
·          Supplied with one cork for the sidearm
·          Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirement

(Sample Photo Displayed. Individual items may differ from the image shown)