Distilling Receivers

Photo of PYREX® Water By Distillation Receiver

For determining water by distillation. Receivers have a 24/40 Standard Taper ground joint on the sidearm.The 10mL receiver is graduated from 0 to 1mL in 0.1mL intervals with a maximum scale error of 0.05mL. Graduation intervals from 1.0 to 10.0mL are 0.2mL with maximum scale error of 0.1mL.The 25mL receiver is graduated from 0 to 1mL in 0.1mL intervals with a maximum scale error of 0.05mL. Graduation intervals from 1.0 to 25.0mL are 0.2mL with a maximum scale error of 0.1mL. Inner and outer joint sizes are 24/40 Standard Taper ground joint.

Photo of Corning 3602-10 PYREX 10mL Dean Stark Distilling Receiver

This 10mL PYREX® Dean Stark distilling receiver is graduated from 0 to 1mL in 0.1mL intervals, with a maximum scale error of 0.05mL. The graduation intervals from 1.0 to 10.0mL are 0.2mL, with a maximum scale error of 0.1mL. Reference: ASTM E-123.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of PYREX® Oil Dilution Distilling Receiver
For determining the amount of dilution in crankcase oils when gasoline has been used as fuel. Designed to allow heat-sensitive materials to be kept away from the hot base of the flask. With an outer 24/40 joint at the top and an inner 24/40 joint on the sidearm.
Photo of Corning 3622-20 PYREX Barrett Distilling Apparatus

PYREX® Barrett Distilling Apparatus with Stopcock and 24/40 Standard Taper Joints This PYREX® distilling apparatus is for determining water content in petroleum or bituminous products. It is graduated upwards from the stopcock to 3mL in 0.2mL divisions, and from 3mL to 20mL in 0.5mL divisions. For replacement stopcock plugs, see No. 7680. For replacement retaining clips, see No. 7280. Reference: Barrett method B-2.

Photo of KIMBLE® 22012 KIMAX® Modified Dean-Stark Distilling Receiver with Full Length 24/40 Joints

KIMBLE® 22012 KIMAX® Modified Dean-Stark Distilling Receiver with Full Length 24/40 Joints and a siphon return arm.  Sidearm bridge equalizes pressure. Designed from ASTM Specification E123, Style A. 

(Sample Photo Displayed. Individual items may differ from the image shown)