Condensers

Photo of Corning 2560 PYREX® Graham Condensers with Top and Bottom Standard Taper Joints

These PYREX® Graham condensers have a high surface area per unit length of the long jacket with a 24/40 Standard Taper outer joint at the top and a 24/40 Standard Taper inner joint at the bottom with a drip tip. They are primarily used in vacuum distillations. Condenser tubulations are approximately 10mm O.D.

Photo of Corning 2700-200 PYREX® 200mm West Condenser

This PYREX® West condenser is designed with a 200mm long heavy-wall outer jacket to provide a sturdy, long-lasting unit, while the inner tube has a thinner wall for efficient heat transfer. The tubulations are on the same side to reduce breakage and the adapter ends are all tooled for No. 3 rubber stopper fit. The tubulation O.D. is approximately 10mm.

Photo of Corning 2340 PYREX® Liebig Condenser with Sealed Inner Tube

This PYREX® general purpose condenser can be used for either distillation or extraction. Although the condensing area per unit length of the 200mm long jacket is low, the large capacity water jacket gives efficient cooling. Condenser tubulations are approximately 10mm O.D. The adapter end is tooled for uniform stopper fit, accommodating a No. 3 rubber stopper.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Corning 2360 PYREX® Liebig Condenser with 24/40 Standard Taper Inner Joint and Drip Tip

These PYREX® general purpose condensers have a 24/40 Standard Taper inner joint at the bottom with a drip tip. Although the condensing area per unit length of the jacket is low, the large capacity water jacket gives efficient cooling. They can be used for either distillation or extraction. Condenser tubulations are approximately 10mm O.D.

Photo of Corning 2400 PYREX® Liebig Condensers with Drip Tip, Standard Taper Outer and Inner Joints

A general purpose condenser that can be used for distillation and extraction. Suitable for use in vacuum distillations. With the outer ts joint at the top and the inner ts joint at the bottom with a drip tip. The tubulation O.D. is approximately 10mm.

Photo of Corning 2480 PYREX® Allihn Condensers with Drip Tip and Standard Taper Outer/Inner Joints

These widely used PYREX® condensers have a greater surface area than the corresponding Liebig type and are suitable for use in vacuum distillations. They have an outer Standard Taper joint at the top and an inner Standard Taper joint at the bottom with a drip tip. The tubulations have an O.D. of approximately 10mm.

Photo of Corning 2800-300 PYREX® 300mm West Condenser with Drip Tip and Standard Taper Inner/Outer Joints

This PYREX® West condenser is designed with a 300mm long heavy-wall outer jacket to provide a sturdy, long-lasting unit, while the inner tube has a thinner wall for efficient heat transfer. The tubulations are on the same side to reduce breakage. It has a 24/40 Standard Taper outer joint at the top and the 24/40 Standard Taper inner joint at the bottom with a drip tip. The tubulation O.D. is approximately 10mm.

Photo of Kimble 18185-1420 KIMAX West Condenser with Drip-Tip and Medium Length 14/20 Joints

Kimble 18185-1420 KIMAX West Condenser with Drip-Tip and Medium Length 14/20 Joints is a one-piece sealed unit with a Standard Taper outer joint at the inlet and a Standard Taper inner joint drip tip at the outlet. Inlet end is sloped to avoid trapping condensate. Inner tube is light-walled with a small diameter jacket to keep minimal space between them. Hose connections accept 5/16" I.D. flexible tubing.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of KIMBLE® 18140 KIMAX® Liebig Condenser with Full Length 24/40 Joints and Drip Tip

KIMAX one-piece sealed unit with a 24/40 outer joint at the inlet and a 24/40  inner joint at the outlet. Inlet end is sloped to avoid trapping condensate. Drip tip is provided at the lower end. Hose connections accept 5/16 inch I.D. flexible tubing. Suitable for use with ASTM D849.

(Sample Photo Displayed. Individual items may differ from the image shown.)