Tubing Clamps

Photo of Swinging Jaw Compressor Clamp
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and long life.
Photo of Open Jaw Compressor Clamp
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and long life.
Photo of Closed Jaw Compressor Clamp
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and long life.
Photo of Troemner Talboys Regular Hosecock Clamps

Troemner Talboys Hosecock Clamps offer easy one-hand operation. Convex bearing surfaces and rounded edges protect tubing. Pinchcocks are designed to quickly start and stop flow to provide complete closure without damaging tubing. Operated with a simple squeeze operation. Constructed of nickel-plated zinc or stainless steel. Adjustment screw with oversized head for accurate regulation. Built-in side lugs for foot mounting. 17mm (0.67") Max Opening.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Day's Pinchcock Clamp
Steel wire; nickel plated. Jaw opening for up to ⅜" (10mm) diameter tubing. Length 2⅝" (67mm).
Photo of Heavy-Duty Screw Compressor Clamp
Standard Open-Jaw C-Clamp Without side post. Designed for heavy-duty applications, these clamps are manufactured from heavy, die-cast, zinc-alloy and plated for corrosion resistance.
Photo of Troemner 916184 Talboys Heavy-Duty Hosecock

Talboys flow control devices offer selection and quality. They are finely machined to deliver accurate regulation or interruption of fluid flow. Every flow control device resists corrosion and rust. Hosecocks offer easy one-hand operation. Convex bearing surfaces and rounded edges protect tubing. Large handwheel for ease of flow adjustment and the unique design offers unparalleled control. Works well with heavy cut nylon braided tubing. 29mm (1.14") Grip Size.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of BEL-ART Acetal Plastic Tubing Clamps

Acetal Plastic Tubing Clamps are durable and will not rust, distort or corrode. Select from 3 sizes for best tubing fit.

Photo of Hose/Tubing Clamp Assortment Kit. Control Company

Clamps securely fasten tubing to connectors, pumps, glassware, and filtration units. Chemical-corrosion-resistant, rustproof, non-conducting nylon is ideal for use in wide temperature range of 32 to 194°F (0 to 90°C). One-piece, reusable clamp squeezes shut for a leak-proof seal. Pressing on the side releases the clamp. Designed specifically for pressure, vacuum, and liquid applications where a secure seal is required. Tight-Seal™ is the only clamp that works with all types of plastic and rubber tubing. May be chemically or gas-sterilized for biomedical or food applications.

Photo of Delrin® Screw Clamp
This tubing clamp offers on/off and fine control so accurately that it replaces stopcocks in many applications. It may be put in place without disconnecting tubing or interrupting your operation. Molded of Delrin® plastic, the clamp is autoclavable and resistant to acids, alkalies, and organic solvents. Accepts flexible tubing up to 14 mm (1/2") O.D. 3 per pack.
Photo of Tubing Pinch Clamp
Strong acetal plastic clamp with serrated jaws provides secure closure on tubing with a wall of .82 mm (1/32 ") or thinner. The open clamp slides over tubing for easy installation at any point and may be left clipped in an open position for convenient storage without constricting flow. It locks when closed and springs open when the locking tab is released. Jaws are 27mm (11/16") long total length is 59 mm (2-5/16") long.
Photo of Nalgene 6165 Polypropylene Tubing Pinch Clamp

Nalgene 6165 Polypropylene Tubing Pinch Clamps are Ideal for use with PVC laboratory tubing. Allows precise, one-hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Plastic clamp won't rust, corrode or deform. Molded in one piece polypropylene with no sharp edges. Fits tubing with O.D. of 1/4" to 7/16 ".

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Tubing Clamp
The clamp locks closed and opens when the locking tab is released. When not in use, clamp can be clipped to tubing without restricting flow. Jaws are 27mm (1 1/16") long. Total length: 59mm (2 5/16") long. Attach at any point on tubing without disconnecting tubing. Jagged jaws close tubing with a wall of .82mm (1/32") or thinner. Autoclavable.