Cell Culture Flasks

Photo of Nunclon Triple Flask
The Nunclon D TripleFlask is designed with three parallel growth surfaces which provide a total culture area of 500cm2 within the same external dimensions of a standard 175cm2 flask. The Triple Flask's compact design saves incubator space, yet triples cell culture surface area. The three parallel growth surfaces promote conventional, flat, monolayer culturing. Cell lines do not require recharacterization therefore, scale up is easy and consistent. Triple Flask is emptied the same as conventional flasks.
Photo of Falcon™ Primaria™ Cell Culture Flasks.
Falcon™ Primaria™ Cell Culture Flasks are made of surface-modified polystyrene for enhanced cell culture. Canted neck, blue plug-seal screw cap. Falcon™ Primaria™ cultureware features unique nitrogen containing tissue-culture surface chemistry that improves attachment, spreading, and growth for many primary cells or cell lines. No special storage required. Sterilized by gamma irradiation, nonpyrogenic.
Photo of Nunc Filter Cap Flasks
The Filter Cap on Nunc Flasks effectively excludes micro-organisms larger than 0.22m while allowing optimal gas exchange. Maximum protection against contamination is provided by a unique hydrophobic filter. Bacterial and fungal spores can neither pass through nor grow through the matrix and contaminate the culture. The hydrophobic filter won't clog in a humid atmosphere, or if it accidentally comes in contact with the medium. The filter surface area in each size cap is proportional to the flask volume, assuring adequate gas exchange.
Photo of Trypsinizing Flasks with Pourout and Caps
Deep-fluted sides promote turbulence. Dam below sidearm to retain untrypsinized tissue when decanting. Deep-skirted screw cap on sidearm prevents contamination of flask contents. Designed for use with Wheaton Biostir Magnetic Stirrers and Wheaton Magnetic Spinbars. Sizes 150mL-1500mL accept Wheaton Impeller Assemblies for Trypsinizing Flasks. Sidearm caps are 20-415 size. Caps have white (styrene-butadiene) rubber liner. Wheaton-33 low extractable borosilicate glass.
Photo of Corning® 25cm² Triangular Cell Culture Flask with Angled Neck and Phenolic Cap

Corning® 25cm² Triangular Cell Culture Flask with Angled Neck and Phenolic Cap is manufactured from optically clear virgin polystyrene. It has 25cm²  available growth area and has been TC-treated for optimal cell attachment. Angled neck flasks improve pipet access and reduce medium sloshing into the neck. Printed with lot numbers for ease in traceability, it is 100% integrity tested. Sterilized by gamma irradiation and certified non-pyrogenic.

(Sample Photo Displayed. Individual items may differ from the image shown)

 

Photo of Corning® 25cm² Triangular Cell Culture Flask with Angled Neck and Vented Cap

Corning® 25cm² Triangular Cell Culture Flask with Angled Neck and Vented Cap is manufactured from optically clear virgin polystyrene. It has 25cm²  available growth area and has been TC-treated for optimal cell attachment. Vent caps contain a 0.2 µm pore, hydrophobic membrane sealed to the cap, providing consistent sterile gas exchange while minimizing the risk of contamination. These caps are highly recommended for use in all CO2 incubators, especially for long-term use. Angled neck flasks improve pipet access and reduce medium sloshing into the neck.

Photo of Corning® CellBIND® 25cm² Sterile Rectangular Cell Culture Flask with Angled Neck and Vented Cap

The Corning® CellBIND® 25cm² Sterile Graduated Rectangular Cell Culture Flask with Angled Neck and Vented Cap is manufactured from optically clear virgin polystyrene. It has 25cm²  available growth area and has been treated with a Corning® CellBIND® surface treatment for enhanced cell attachment. Vent caps contain a 0.2 µm pore, hydrophobic membrane sealed to the cap, providing consistent sterile gas exchange while minimizing the risk of contamination. These caps are highly recommended for use in all CO2 incubators, especially for long-term use.

Photo of Corning® Ultra Low Attachment 25cm² Rectangular Canted Neck Cell Culture Flask with Vent Cap

This Corning graduated rectangular cell culture flask with a canted neck is manufactured from optically clear virgin polystyrene. It has a vented orange high density polyethylene cap. Ultra Low Attachment surface features a covalently bound hydrogel layer that effectively inhibits cellular attachment and minimizes protein absorption, enzyme activation, and cellular activation. Surface is non-cytotoxic, biologically inert, and nondegradable. It has a 25 cm² available cell growth area, a recommended medium volume of 5 to 7.5mL, and a maximum working volume of 10mL.

Photo of Corning 430168 Sterile 25cm² Rectangular Cell Culture Flask with Canted Neck and Plug Seal Cap

This Corning graduated rectangular cell culture flask with a canted neck is manufactured from optically clear virgin polystyrene. It has a orange high density polyethylene cap. 25 cm² available cell growth area, a recommended medium volume of 5 to 7.5mL, and a maximum working volume of 10mL. Canted neck flasks allow easier pouring and improved access to the flask for pipetting or scraping. Plug seal caps feature one-piece linerless construction and are designed for use in closed systems, providing a liquid- and gas-tight seal. When loosened, this cap can also be used in open systems.