Wash Bottles

Photo of Control Company 3340 Adjustable Spray Wash Bottle, 1000 mL

Wash Bottles have an adjustable spray for every requirement. Set the nozzle on fine mist for TLC plates, position it to needle to rinse glassware, and pump a continuous, forceful jet on the big stream position for washing filters. The pump trigger is comfortable for one-handed operation, provides controlled delivery, and requires a very light pressure. Ease of use reduces finger fatigue when continuously pumping or rinsing a series of tubes. Contoured to fit in the hand, it makes the awkward-to-grasp, difficult-to-pump, and impossible-to-control squeeze bottle obsolete.

Photo of Nalgene 2405 Autoclavable Wash Bottles-PPCO

Reduce the risk of contamination when dispensing sterile water or reagents by using Nalgene 2405 Autoclavable Polypropylene Copolymer Wash Bottles. These bottles are flexible, contact-clear, and designed to dispense through the top with a closure and stem molded in one piece for uniform leakproof service. Tip can be cut back to provide increased flow. Bent stem dispensing tube retains its bend after autoclaving but bend angle can be modified by hand while warm if desired. The tight fit of the draw tube and closure prevents separation when squeezing bottle.

Photo of Nalgene 2402 Unitary Wash Bottles LDPE

Nalgene™ 2402 Unitary™ LDPE Wash Bottles will dispense contents without tipping or shaking. Designed with a wide mouth for faster, easier filling. Bottle and tubulation are molded in one piece for uniform leakproof service and precision flow without sputtering. The tip can be cut back to increase flow.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Nalgene 2407 Wide-Mouth Wash Bottles-LDPE

Nalgene 2407 Wide-Mouth LDPE Wash Bottles Pour without sputter because of the precision molded tip. These wash bottles feature a wide-mouth design for easy filling and a through-the-top closure and stem molded in one piece. Tight fit of draw tube and closure prevents separation when squeezing bottle. Tip can be cut back for increased flow. Leakproof.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of BEL-ART Narrow Mouth Wash Bottles with Color-Coded Caps, LDPE

Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents.

  • Choose from Red, Yellow, Blue or Green

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Narrow Mouth Wash Bottles, Natural or Color-Coded
Low-density polyethylene, narrow mouth, wash bottles with color-coded polypropylene closures for easy identification. Five closure colors to choose from: Natural, Blue, Green, Red or Yellow.
Photo of Nalgene 2421 Fluorinated Solvent Wash Bottle-HDPE

Eliminate risk of leakage with self-venting Nalgene™ 2407 Fluorinated HDPE Solvent Wash Bottles, which keep the solvent in the bottle. Offering low permeability and excellent chemical resistance to many organic solvents, these high density polyethylene bottles are useful over a temperature range from 0° to 90°C (32° to 194°F). Bottles are designed to dispense through the top with a closure and stem molded in one piece for uniform leakproof service. The tip is molded to provide a straight stream with precision control and can be cut back to increase flow.

Photo of BEL-ART Safety Labeled Wide Mouth Wash Bottles, 500mL, LDPE

Bel-Art’s Safety Labeled wash bottles include Department of Transportation (DOT) and National Fire Protection Association (NFPA) codes and symbols, Chemical Abstract Service (CAS) number, protective equipment symbols and target organ information, making your workplace a safer place.

Photo of Nalgene 2403 Teflon FEP Wash Bottles

Nalgene 2403 Teflon FEP Wash Bottles ensure contamination-free dispensing and are useful for trace element work. These phthalate-free bottles offer excellent chemical resistance and are molded entirely of fluoropolymers. Designed to dispense through the top with a closure and stem molded in one piece for uniform leakproof† service. The precision-molded tip provides a straight, steady stream and ultimate control without sputtering. Tip can be cut back to provide increased flow. Autoclavable and Leakproof.

(Sample Photo Displayed. Individual items may differ from the image shown.)

Photo of Nalgene 2425 Right-To-Know Wash Bottles-LDPE

Nalgene 2425 Right-To-Know Wash Bottles meet regulatory labeling requirements for chemical containers and use standard, instantly recognizable symbols and colors. Chemical name, International Chemical Society (ICS) chemical formula and Chemical Abstract Service (CAS) number printed on bottle for easy identification. Color bar that corresponds to colored closure to prevent cross-contamination. These low density polyethylene bottles are flexible for easy dispensing and translucent for viewing contents. Self-venting, but contents stay in bottle with no risk of leakage. Leakproof.

Photo of Nalgene 2436 Vented Unitary Right-To-Know Wash Bottles

Nalgene 2436 Vented Unitary LDPE Right-To-Know Wash Bottles help keep hazardous volatile liquids off the lab bench. These wash bottles feature a unique vent system. Unitary bottle prevents contamination when filling the bottle; no draw tube assembly to pick up contamination off the lab bench. A strong, steady stream of liquid is dispensed when the wash bottle is squeezed. Marked with four color, NFPA diamonds, GHS compliant hazard symbols, and right-to-know chemical information. Choose from seven chemical markings. Leakproof.

Photo of BEL-ART Vented Safety Labeled Wide Mouth Wash Bottles, 500mL, LDPE

A unique, 2-piece valve prevents pressure build-up of solvents within these Right-to-Know Safety-Labeled Wash Bottles. Volatiles are vented eliminating solvent drips. They are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and suggested protective clothing and equipment. 3/pack.

Photo of BEL-ART Safety Labeled Wide Mouth Wash Bottles, 1000mL, LDPE

Bel-Art’s Safety Labeled wash bottles include Department of Transportation (DOT) and National Fire Protection Association (NFPA) codes and symbols, Chemical Abstract Service (CAS) number, protective equipment symbols and target organ information, making your workplace a safer place.

Photo of Bel Art Red Narrow or Wide Mouth LDPE Wash Bottles

The bright red color of these wash bottles helps identify hazardous contents.

  • Low-density polyethylene with polypropylene closure

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

 

Photo of Nalgene DS2408 Unitary Red Safety Wash Bottles-LDPE

Nalgene DS2408 Unitary LDPE Red Safety Wash Bottles have a wide mouth for safe, fast filling. Bottles are colored red for easy identification and instant recognizablility, for use with acids, bases and alcohols; include red polypropylene screw closures. Molded in one piece, no delivery tube to drip when filling - no contamination of bottle contents by delivery. Leakproof.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of LDPE Color-Coded Wash Bottles
These LDPE Color-Coded Wash Bottles let you color code reagents or coordinate with industry storage codes. Non-vented closure and stem molded in one piece for leakproof service. Tip can be cut back to increase flow.
Photo of Nalgene 2401 Economy Wash Bottles-LDPE

Nalgene 2401 LDPE Economy Wash Bottles. Through-the-top low-density polyethylene wash bottle with closure and stem molded in one piece for leakproof service. Tip can be cut back to increase flow. Tight fit of draw tube and closure prevents separation.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Control Company 3345 Adjustable Spray Wash Bottle, 240 mL

Wash Bottles have an adjustable spray for every requirement. Set the nozzle on fine mist for TLC plates, position it to needle to rinse glassware, and pump a continuous, forceful jet on the big stream position for washing filters. The pump trigger is comfortable for one-handed operation, provides controlled delivery, and requires a very light pressure. Ease of use reduces finger fatigue when continuously pumping or rinsing a series of tubes. Contoured to fit in the hand, it makes the awkward-to-grasp, difficult-to-pump, and impossible-to-control squeeze bottle obsolete.

Photo of Fluorinated Solvent Wash Bottles. Nalgene

Self-venting fluorinated high-density polyethylene bottle with red fluorinated polypropylene closure/stem. Non-metallic vent keeps solvent in bottle. No risk of solvent leakage. Offers low permeability and excellent chemical resistance to many organic solvents. Useful over a temperature range from 0° C to 90° C. "Solvent Wash Bottle" silk-screened in red. Fluorinated HDPE reduces the risk of absorption of the solvent into the bottle itself.