Bags

Photo of Clavies® Biohazard Bag Holders

Bags are securely supported on a stainless steel wire frame and polypropylene bottom, which also serves as a containment tray in the event of bag leakage. Tray is safety orange in color for easy identification as a biohazard containment system. Autoclavable at 121°C (250°F) to maintain sterility. The small bag holder is ideal for benchtop use. These lightweight units are shipped unassembled for more economical transportation. Assembly takes only minutes and is permanent.

Photo of Poxygrid® Biohazard Bag Holders
Keep biohazard bags open and ready for filling. Just place a biohazard bag into the sturdy wire holder and stretch the bag over the top ring. A separate hooked ring rests over the top to keep the bag in place. Circular shape keeps bags wide open for easy access. Made from bright biohazard orange colored epoxy-coated wire.
Photo of Rubber Gas Sampling Bag
One gallon rubber gas sampling bag. For collecting and storing large samples of gases.
Photo of Twist Tie Closures
These twist tie closures are strong, convenient and indispensable for bag closures and bundling hard-to-handle items like rods, wires and tubes. They are superior to strings, wires, and rubber bands - just cut to the length you need and twist the ends together. Made of soft, copper tinned, annealed iron wire sealed in extruded virgin vinyl. 457.2 meters (1500 ft.) roll.
Photo of Rubber Gas Expansion Bag
Rubber gas expansion bag attaches to the top of expansion compartment of all gas pipettes to protect the solution from the atmosphere. 4" x 2" bulb with 24" flexible tubing.
Photo of Bel-Art Biohazard Disposal Bags, Super Strength with Warning Label and Sterilization Indicator

Protect against dangerous tears and leaks with extra strong, high impact polypropylene biohazard disposal bags. Extra heavy-duty bags are 2-mil thick blended polymer, autoclavable to 121° C (250° F) and feature a sterilization indicator patch that darkens when exposed to steam sterilization.

Photo of BEL-ART Bench-Top Biohazard Bags

Bright red, autoclavable bags feature one long flap for easy opening. Printed with the biohazard symbol and sterilization indicator patch, they are made of High Molecular Weight, High-Density (HMHD) polyethylene.

 

Photo of BEL-ART Clear Biohazard Disposal Bags

Great economical solution for safe disposal of used pipettes, Petri dishes, multi-well cell culture plates, cell culture flasks, culture plates, membrane filters and other biohazard wastes. Available with biohazard warning label or plain, non-printed.

Photo of BEL-ART Heavyweight 4-mil Polyethylene Utility Bags

Reusable, transparent polyethylene bags fill a variety of needs. These are ideal for shipping, storage and are especially useful as sample bags. Not autoclavable. These heavyweight bags are .1016 mm (.004") thick. Packed 100 per box.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of BEL-ART Red Biohazard Disposal Bags with Sterilization Patch

Bright red 1.5-mil thick polypropylene bags include black biohazard symbol and precautionary procedures printed in four languages (English, Spanish, French, German) for added safety.

Photo of BEL-ART Lightweight 1.5-mil Polyethylene Utility Bags

Reusable, transparent polyethylene bags fill a variety of needs. These are ideal for shipping, storage and are especially useful as sample bags. Not autoclavable. These lightweight bags are .038 mm (.0015") thick. Packed 100 per box.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Nalgene 6255 Zip Lock Sample Bags_5" x 8"

For collecting and storing dry samples. Strong waterproof LDPE walls are 4 mils thick. Heavy duty "zipper" locks keep dust out, dry items dry and moist items moist. NOT RECOMMENDED FOR LIQUIDS.

Photo of Nasco Whirl-Pak® Write-On Sterile Sample Bags

Nasco Whirl-Pak® Write-On Sterile Sample Bags have a convenient white Write-On Strip that will accept virtually any writing instruments (ballpoint pen, pencil, or felt-tip marker) for easy sample identification. Bags are made of high-quality blended polyethylene. Leakproof closure (whirling or tightly folding the tab over 3 times) prevents impurities from entering the bag and contaminating the sample. Bags are sterilized using ethylene oxide gas at an independent ISO-certified facility. FDA approved. Capacity is measured in fluid ounces. Volume and dimensions are approximate.

Photo of Nasco Whirl-Pak® Sterile Sample Bags

Nasco Whirl-Pak® Sterile Sample Bags are made of high-quality blended polyethylene. Leakproof closure (whirling or tightly folding the tab over 3 times) prevents impurities from entering the bag and contaminating the sample. Bags are sterilized using ethylene oxide gas at an independent ISO-certified facility. FDA approved. Capacity is measured in fluid ounces. Volume and dimensions are approximate. Whirl-Pak bags are 2.25 mil (.057 mm) thick. Bags should not be used at temperatures above 180° F (82° C).

Photo of Control Company 3288 Tight-Ties 7.5" Closures

These cable ties feature a unique tapered tip for fast insertion and tightening. One-piece, self-locking ties are made of tough, chemical- corrosion-resistant, rustproof, non-conducting nylon. Applications include affixing tubing to pumps, bundling materials, hanging equipment. Use in the wide temperature range of –40 to 185°F (–40 to 85°C). Tensile strength is 12 to 50 pounds. When fastened, the diameters adjust 5/32 to 4 inches (2.60 to 101.60 mm). Includes 400 ties consisting of five sizes.

Photo of Nasco Whirl-Pak® Sterile Thio-Bags®

Nasco Whirl-Pak® Sterile Thio-Bags® are specially designed for sampling chlorinated water. This single use, sterilized, lightweight, unbreakable container is always ready for immediate use. Used by many states and EPA approved, this strong transparent bag holds a nontoxic, nonnutritive tablet containing 10 mg of active sodium thiosulfate to neutralize chlorine at the time of collection. As an added feature, Thio-Bags® have a Convenient Write-On Strip and markings for 100 ml and 300 ml measurements. Bags are made of high-quality blended polyethylene.